Moblene Super Brake Fluid DOT4

High performance hydraulic brake Fluid

Product Description

Mob4lend MG 20W-40

Mobolene Super Brake Fluid DOT 4 is high performance poly glycol based brake fluid specially designed for use in disc, drum & Anti-locking Brake Systems (ABS) of any commercial vehicles, passenger cars and motorcycles operating under moderate to severe conditions and requiring a DOT 4 type of fluid.

 

Features & Benefits

  • High boiling point reduces the impact to moisture absorption while in service and provides reliable braking performance
  • Superior oxidative stability resists oxidation at high temperatures encountered in disk braking systems
  • Superior high temperature stability and low temperature fluidity ensure trouble free operation
  • Effective corrosion inhibitors provide long term corrosion protection to the metallic components to the brake systems
  • Provides lubricity and system protection
  • Compatible with all seals and metals used in conventional braking systems requiring poly glycol brake fluids

 

Applications

  • Hydraulic brake fluid systems in cars, motorcycles and commercial vehicles where DOT 4 type of Brake fluid is specified
  • Disc and drum brakes including modern vehicles fitted with ABS requiring DOT 4 quality fluids
  • For improved braking performance, it can also be used in hydraulic brake systems of vehicles requiring DOT 3 or SAE J 1703 quality fluids
  • Hydraulic clutch systems requiring fluids of this quality

 

Warnings

  • Mobolene Super Brake Fluid DOT 4 should never be used in place of or mixed with silicone based brake fluids (DOT 5) nor should be used where DOT 5.1 fluid I required
  • All brake fluids should be kept clean and dry. Dirt or water contamination can affect the performance of brake fluid and could cause brake system failure
  • Brake fluids can affect the vehicle paintwork , so remove spills immediately without rubbing

 

Pack Size : ½ l, ¼ l

 

Specifications, Approvals & Typical Properties

Meets the following Specifications
FMVSS 116 DOT 4
Typical Properties
Test Parameters Test Method Test Values
Viscosity @ -40 0 C, cSt FMVSS 116 < 1800
Viscosity @ 100 0c, cst FMVSS 116 > 1.5
Equilibrium Reflex boiling point (erbp, ) OC FMVSS 116 > 230
Wet ERBP, "C FMVSS 116 > 155
Ph value FMVSS 116 7.0 to 11.5
Density @ 15°C Kg/I D 1298 1.06

Note : The above physical characteristics may vary from properties of actual product supplied

Chairman Message
M Maximum Mileage
o Oils for OEM's
b Blended with World Class Additives
 Offering High Performance Lubricants
l Lubricant that Lubricates
e Energy Conserving
n Nation's Pride
e Equivalent to International Standards

Product List

Automotive Lubricants

- Mobolene Engine Oil MG 20W40
- Mobolene Engine Oil MG 15W40
- Mobolene CNG Green MG 20W50
- Mobolene Super 30,40
- Mobolene ATF Type A
- Mobolene EP Gear Oils 90/140
- Mobolene Gear EP 80W90 / EP 85W-140
- Mobolene 4T Plus 20W-40 / 4T Plus 10W-30
- Mobolene Ultra 2T Plus

Automotive Specialities

- Mobolene Super Brake Fluid DOT4
- Mobolene Fork Oil
- Mobolene ICE COOL Coolants

Automotive & Industrial Greases

- Mobolene AP-3 (Lithium Base) Grease
- Mobolene AP-3 Xtramile Long Life Grease
- Mobolene Wheel Bearing Grease (WB Grease)
- Mobolene Calcium Grease